The ME7873NR is fully 3GPP-compliant and supports both FR1 (Sub-6GHz) and FR2 (mmWave) frequency bands. It can test almost all 5G NR mobiles used worldwide.
Learn more about the Radio RF Conformance Test System ME7873NR.
Most Recent Videos
1:25Coherent OTDR MW90010B
The MW90010B is a coherent OTDR with a wavelength-tunable light source from 1,527.60 nm - 1,567.13 nm. It can accurately detect the failure location of optical submarine cables up to 20,000 km in leng
5:56Analyzing Pulsed Radar with the Field Master Pro Spectrum Analyzer
This video highlights how to use the Anritsu Field Master Pro MS2090A with the pulse analyzer option to make measurements on a pulsed radar. The video is made at the Mount Umunhum NEXRAD weather radar
0:50Coherent OTDR MW90010B
The Anritsu Coherent OTDR MW90010B is a portable device that can locate faults in submarine cables up to 20,000 km. It has a wider wavelength range than previous models and a built-in tunable light so
3:59Automated Valet Parking Simulation
This video explains the required test solutions to improve Type-2 AVP reliability.
5:49Anritsu LTE C-V2X Functional Test Solution
This video introduces the LTE C-V2X functional test solution for developing V2X wireless communications technologies. It also introduces an example of test scenarios simulating the detection of an obs
3:28How to test 5G Field Tests for Low-Latency Applications with Anritsu's MT1000A
The Network Master Pro MT1000A is equipped with a portable Multi-band GNSS receiver to measure RAN timing coming from PTP network. Synchronization problem can be spotted in the field for construction
3:48MT8000A 5G Base Station Manufacturing Test Solution
Base Station Test Suite for 5G NR Sub-6 GHz MX800046A / Base Station Test Suite for 5G NR mmWave MX800045A cover the frequency bands up to 7.125 GHz (FR1) and the mmWave band (FR2), while supporting t
4:52Mobile Interference Hunting with Field Master MS2080A
This video demonstrates the ease in which the new Field Master MS2080A can be used with Anritsu’s Mobile InterferenceHunter software to locate an unknown signal of interest. The user is show
20:36Anritsu Handheld Product Overview
This video is a high-level overview of all of our RF handheld products and covers the following products and solutions
4:42Mobile Device Repair & Reverse Logistics Testing Solution
Refurbishing 4G devices for resale and ensuring the operability of returned 5G UE requires test solutions that have key features.
2:07Anritsu Presents new Rubidium™ MG362x1A Series at IMS 2022
Rubidium is the lowest phase noise (-140 dBc/Hz at 10 GHz output at 10 kHz offset) signal generator which is better than traditional signal generators currently available on the market
9:54SmartStudio Suite for IoT Testing
This video reviews the challenges and requirements of IoT wireless device testing and introduces Anritsu’s SmartStudio Suite PC application software
8:555G Network Synchronization using Precision Time Protocol (PTP) – Field Testing walk through
3:265G Network Synchronization using Precision Time Protocol (PTP) – Technical Overview
2:52PIM Master Hunting Setup
In this video, you will see a demo of pinpointing PIM sources using the Anritsu Site Master and PIM hunting wand, and set-up of the Site Master for fast audio tones.
