RF Measurements for NR in Non-Terrestrial Networks

Share this Video

NR NTN (Non-Terrestrial Network) is one of the key topics and lead deployments for satellite D2D (Direct to Device) communication. It uses satellites, which enables communication in areas not covered by terrestrial network, but propagation delay, doppler shift and low signal level occur, creating a demanding RF environment.

In this video, we will demonstrate Anritsu's user-friendly test solution designed for RF measurements of NR NTN technology.

Next Video

Millimeter Wave Measurement Method Using a Signal Analyzer and External Mixer

This video introduces how to measure millimeter waves up to 325 GHz by connecting an external mixer to a si...

Most Recent Videos

4:11

Millimeter Wave Measurement Method Using a Signal Analyzer and External Mixer

RF Measurements for NR in Non-Terrestrial Networks

Next Video

Most Recent Videos

This video introduces how to measure millimeter waves up to 325 GHz by connecting an external mixer to a signal analyzer.

This is a demonstration video of the USB4 v2 compliance test using the MP1900A.

Learn how to inject PN Differential Skew into a physical system using the MP1900A

Demonstrates the measurement of dielectric constant and dielectric loss for a fluorine material.

A simple and inexpensive method to make amplitude response measurements using analog sweep option and frequency marker feature in Rubidium signal generator.

Demonstration of a DUT response using Rubidium Signal Generator Analog Sweep

How to accurately measure the electrical length and loss of a cable using a VNA

Analyzing RF interference with the Field Master RTSA

Understanding Key Performance Indicators is crucial for optimizing your 400G ZR/ZR+ deployments and ensuring peak network performance.

Demystifying 400G ZR and ZR+ Optics: three specific challenges associated with deploying 400G ZR and ZR+ optics.

High-Speed Data on the Move: How 400G ZR and ZR+ Optics are Changing the Game

Introduction to 110 GHz ONA solution for measuring Opto-electronic devices and components

Anritsu’s Network Master Pro MT1040A is ideal for evaluating 400G Ethernet networks on-site and at data centers.

Fiber Visualizer OTDR for displaying events, such as optical-fiber splices and connectors.

The ACCESS Master MT9085 series is a compact handheld all-in-one tester for performing optical pulse tests, optical loss/power measurements, and optical fiber end-face inspections.

The compact, battery-powered and easy-to-use Anritsu MT1000A with 10G Multirate Module MU100010A has everything in a single, handy tester needed to install and maintain communication networks from 1.5

A short video explaining how to make BR / EDR / BLE measurements on a Bluetooth module using the Anritsu MT8852B test instrument and the CombiTest software.

A short video explaining how to use the Anritsu MT8852B test set and the MX885203A low energy software to perform Bluetooth low energy tests.

performance advantages and design innovations of the Anritsu Rubidium Signal Generator Family

features and functionality of the Anritsu Rubidium Signal Generator