Base Station Test Suite for 5G NR Sub-6 GHz MX800046A / Base Station Test Suite for 5G NR mmWave MX800045A cover the frequency bands up to 7.125 GHz (FR1) and the mmWave band (FR2), while supporting the efficient test environment for multiple test antenna and MIMO verification. Base Station Test Suite for 5G NR Sub-6 GHz MX800046A / Base Station Test Suite for 5G NR mmWave MX800045A cover the frequency bands up to 7.125 GHz (FR1) and the mmWave band (FR2), while supporting the efficient test environment for multiple test antenna and MIMO verification.
The Network Master Pro MT1000A is equipped with a portable Multi-band GNSS receiver to measure RAN timing c...
Most Recent Videos
The MW90010B is a coherent OTDR with a wavelength-tunable light source from 1,527.60 nm - 1,567.13 nm. It can accurately detect the failure location of optical submarine cables up to 20,000 km in leng
This video highlights how to use the Anritsu Field Master Pro MS2090A with the pulse analyzer option to make measurements on a pulsed radar. The video is made at the Mount Umunhum NEXRAD weather radar
The Anritsu Coherent OTDR MW90010B is a portable device that can locate faults in submarine cables up to 20,000 km. It has a wider wavelength range than previous models and a built-in tunable light so
This video explains the required test solutions to improve Type-2 AVP reliability.
This video introduces the LTE C-V2X functional test solution for developing V2X wireless communications technologies. It also introduces an example of test scenarios simulating the detection of an obs
The Network Master Pro MT1000A is equipped with a portable Multi-band GNSS receiver to measure RAN timing coming from PTP network. Synchronization problem can be spotted in the field for construction
This video demonstrates the ease in which the new Field Master MS2080A can be used with Anritsu’s Mobile InterferenceHunter software to locate an unknown signal of interest. The user is show
This video is a high-level overview of all of our RF handheld products and covers the following products and solutions
Overview of our Spectrum Analyzers
A compilation of highlights in 2022
Refurbishing 4G devices for resale and ensuring the operability of returned 5G UE requires test solutions that have key features.
Rubidium is the lowest phase noise (-140 dBc/Hz at 10 GHz output at 10 kHz offset) signal generator which is better than traditional signal generators currently available on the market
This video reviews the challenges and requirements of IoT wireless device testing and introduces Anritsu’s SmartStudio Suite PC application software
The ME7873NR is fully 3GPP-compliant and supports both FR1 (Sub-6GHz) and FR2 (mmWave) frequency bands. It can test almost all 5G NR mobiles used worldwide.
In this video, you will see a demo of pinpointing PIM sources using the Anritsu Site Master and PIM hunting wand, and set-up of the Site Master for fast audio tones.