Introducing the Network Master Pro MT1040A – Telecom world’s smallest 400G Network Tester
-
Read White PaperSubmarine Optical Network Testing
Submarine cables can be damaged by ship anchors or natural disasters, so it is necessary to quickly identify the optical fiber failure location, pull up the submarine cable, and repair it in such case
-
Read Application Note
Necessity of Testing in PON Installation
Dive into the intricacies of Passive Optical Network (PON) technology, offering detailed insights into its specifications and the challenges that might arise within PON networks.
-
3:01Watch VideoEfficient Testing at Deployment of 400ZR/ZR+ Networks
Introduction of efficient testing at deployment of 400ZR/ZR+ networks
-
0:50Watch VideoCoherent OTDR MW90010B
The Anritsu Coherent OTDR MW90010B is a portable device that can locate faults in submarine cables up to 20,000 km. It has a wider wavelength range than previous models and a built-in tunable light so
-
Read BlogWhy Subsea Optical Cables are Important in a Hyperscale Network World
Maintaining transmissions through subsea cables has a profound impact on more than just how people gather and exchange information.
-
Read Application Note
Automated Scenario Tests for 400ZR Deployment
This document explains how to use a scenario to automate testing using the Network Master Pro MT1040A and the OSA MS9740B when deploying 400ZR and helps reduce data center interconnect operation costs
-
read application note
Automated Bit Error Rate (BER) Testing - Far End Loopback BER
This document explains use of scenarios to automate BER testing using the Network Master Pro MT1000A/MT1040A. The scenarios are used to evaluate WDM networks.
-
Read Application Note
Layer 2 Control Plane (L2CP) Transparency Testing - Carrier Ethernet Network Service Activation
This document explains the use of scenarios to automate testing for the Layer 2 control protocols (L2CP).
-
Read Application Note
Optical Transceiver (XCVR) Quick Check SEEK Scenario
This document explains the use of scenario (xCVRQuickCheck.obcfg) for the optical transceiver (XCVR) simple check using the Network Master Pro MT1000A/MT1040A.
-
Read White paper
One if by Land, Two if by Sea: 400G Test Scenarios
As more applications are moving to 400Gbps, this is driving the need for proper, reliable testing across a range of use cases
-
29:01Watch WebinarWhy is Submarine Cable testing so important?
New technologies for testing your subsea network
-
Read BlogDesign and Testing Considerations as Data Centers Incorporate 400 Gbit Ethernet
400 Gbit Ethernet is quickly replacing 100 Gbit Ethernet in data centers, increasing the need for a new approach to network design, architecture, and testing. Related StoriesReturn of...
-
Read White Paper
Advantage of 400ZR Deployment for Data Center Interconnects
This white paper describes market trends surrounding 400ZR, the main technical specifications, and test solutions required for deployment and quality maintenance
-
Read Solution Overview
New Issues in Data Center (DC) Installation and Maintenance
The spread of cloud services, SNS, and video streaming is increasing the number of businesses using metropolitan data centers (Metro DC) as interconnects
-
1:03:55Watch WebinarEthernet in Data Center Networks
This webcast will examine the current trends in Ethernet use in data center networks as well as the technologies that will help operators efficiently meet growing bandwidth demands, including verifyin
-
Read White PaperEthernet in Data Center Networks
As data center network operators move to 400 Gigabit Ethernet and beyond, they will face new challenges for different applications.
-
Read Test Report
Ethernet Alliance High Speed 100/400G Interoperability Report
The Anritsu MT1040A Network Master Pro 400G completed the Ethernet Alliance (EA) High-Speed Networking 100G/400G Interoperability and Physical Layer compliance plugfest.
-
Read Leaflet
Submarine Cable Test Solutions
Learn about tests solutions for submarine cable using Anritsu’s Coherent OTDR MW90010A
-
1:01:48Watch WebinarThe Drive for Edge Computing: Overcoming Data Center Interconnect Testing Challenges
In this webinar, we will briefly discuss how to overcome the new testing challenges facing network I&M supporting Metro DCI.
-
Read Leaflet
Testing O-RAN Equipment
Traditionally, the radio access network (RAN) has been built in compliance with 3GPP standards and mobile network operators have introduced RAN equipment sets with the various network elements
-
Loading More...
