Download Your App Note Now

Work Email

First Name

Last Name

Company Name

Country

State

City

Phone Number

Product Family

Industry

Purchasing Timeframe

Anritsu's privacy policy

I have read Anritsu's privacy policy

Opt-in To Future Emails

Thank you!

Error - something went wrong!

Offline Split 2x-Thru Touchstone File to Two 1x-Thru Using Equation Editor in ShockLine™ Vector Network Analyzer

The network extraction feature is a tool used to extract fixtures with incomplete calibration standards. After extracting the fixtures, the user can import them to a third-party simulation software such as MATLABS, ADS, and other similar simulation software to either proceed with de-embedding or embedding the fixtures to analyze the effects of the characteristics of the DUTs.

This application note shows how to extract 2x-thru to 1x-thru using the equation editor feature in offline mode since 2x-thru is the most popular network extraction method for splitting into two (2) 1x-thru.

Previous Flipbook

Anritsu and Polar Instrument Solution for Delta-L 4.0 Measurement Based on Atlas SI Software with Anritsu 4-Port Benchtop VNAs

Delta-L is an algorithm developed by Intel for PCB manufacturers for verifying PCB design. Vector Network A...

Next Flipbook

Material Measurements with Vector Network Analyzers

The increasing popularity of mobile communications, wireless data transfers, and instant access technologie...

Want a head start on tomorrow's technologies? Sign up for monthly insights

Work Email

First Name

Last Name

Company Name

Country

Opt-in To Future Emails

Thank you!

Error - something went wrong!

Return to Home

Offline Split 2x-Thru Touchstone File to Two 1x-Thru Using Equation Editor in ShockLine™ Vector Network Analyzer

Previous Flipbook

Next Flipbook

Other content in this Stream

Advanced 6G research topics like channel sounding, fundamental device characterization and modeling, waveguide banded measurements for amplifiers, broadband receivers, etc.

On-demand Microwave Journal panel discussion: RF/Microwave Test and Component Solutions for New Space

Anritsu Custom Solutions team assisted a provider of HMI and Smart Surface solutions in identifying a robust solution for validating the performance of their printed 5G Smart Surfaces.

This webinar will review traditional long cable insertion loss test solutions and the limitations and drawbacks of these methods. It will also discuss an innovative distributed modular VNA architectur

THD is commonly defined as the proportion of the root mean square (RMS) sum of harmonic signal amplitudes related to a desired fundamental frequency.

Material measurement will become an even more important measurement to be performed on all devices that carry high-frequency signals. Characterizing the materials for their electrical loss properties

This paper discusses methods for transferring the sensor-based calibration to the probe tip using user power calibrations and power embedding/de-embedding for broadband and banded millimeter-wave (mmW

Characterizing high-frequency active or passive devices is extremely challenging especially now that more devices are in the D-band and above which are paving the path for future technologies like 6G

Hosted by MW&RF this informative Q&A webchat with Anritsu discusses one of the primary use cases for a broadband VNA – on-wafer, device characterization

Rubidium is the lowest phase noise (-140 dBc/Hz at 10 GHz output at 10 kHz offset) signal generator which is better than traditional signal generators currently available on the market

Delta-L is an algorithm developed by Intel for PCB manufacturers for verifying PCB design. Vector Network Analyzer serves an important requirement for all PCB manufacturers in order to be compliant

The increasing popularity of mobile communications, wireless data transfers, and instant access technologies is giving rise to the need for faster data rates and more data channels to support an ever-

This eBook covers some of the new advancements in VNA technology that are enabling new applications to use VNAs for characterization.

This three-part series of the VectorStar ME7838G broadband system will describe how the VectorStar ME7838G can be set up to make on-wafer measurements sweeping from 70 kHz to 220 GHz.

Part 2 will continue the discussion with broadband calibration and broadband measurement best practices.

Part 1 of the series will discuss the basic broadband structure, module interface technologies, and the broadband 220 GHz probe

As higher frequencies are considered for automotive radar or for 5G communication systems

ShockLine Vector Network Analyzers Automotive Applications Overview Discover how ShockLine VNAs are utilized for testing automotive applications both inside and outside of the vehicle.

This video introduces the latest addition to the ShockLine family, ME7868A 2-Port VNA system

In this webinar session, you will learn about IMDView™ software that provides the ability to automatically switch between S-parameter measurements and intermodulation characterization using the option