This application note discusses how to improve high frequency S-parameter measurements by moving the VNA port to the DUT. By using the ShockLine™ MS46522B E-band 2-port performance VNA with a 5 meter tether and incorporating the modules, cables, and mainframe into an integrated system, high frequency S-parameter measurements can be made with a more accurate measurement.
Most Recent Flipbooks
Dive into the intricacies of Passive Optical Network (PON) technology, offering detailed insights into its specifications and the challenges that might arise within PON networks.
the pivotal role of satellite communications in contemporary military operations, their varied applications, the transformative influence of 5G technology, challenges related to interference
SIGINT has become a pivotal weapon with the potential to shape the outcomes of conflicts and operations.
As network operators strive to optimize broadband services in rural regions, improve coverage, ensure reliability, and enhance the user experience.
The 21st-century battlefield is evolving rapidly with advances in military systems, such as radar and electronic countermeasures (ECM) tactics.
Material measurement will become an even more important measurement to be performed on all devices that carry high-frequency signals. Characterizing the materials for their electrical loss properties
Bluetooth® Low Energy (LE) Audio products continue to evolve, offering new user experiences. This document provides the technical details of LE Audio technologies and the significant advancements that
This paper discusses methods for transferring the sensor-based calibration to the probe tip using user power calibrations and power embedding/de-embedding for broadband and banded millimeter-wave (mmW
This document explains how to use a scenario to automate testing using the Network Master Pro MT1040A and the OSA MS9740B when deploying 400ZR and helps reduce data center interconnect operation costs
This document explains use of scenarios to automate BER testing using the Network Master Pro MT1000A/MT1040A. The scenarios are used to evaluate WDM networks.
This document explains the use of scenarios to automate testing for the Layer 2 control protocols (L2CP).
This document explains the use of scenario (xCVRQuickCheck.obcfg) for the optical transceiver (XCVR) simple check using the Network Master Pro MT1000A/MT1040A.
A transformational era in military and defense is underway and has an underpinning of 5G
Learn the challenges of testing 5GNR base stations and how to test the performance outside of traditional methods.
Automotive services operate at specific angular ranges in relation to the vehicle like Mobile Network communication
5G NR has opened up many verticals enabling all-around user experience expanding into the automotive space.
In testing the cellular capability of Telematic Control Unit (TCU) it is important to test abnormal situations that may arise due to misconfigurations, bad state actors, or the current conditions resu
This application note explains the necessity of inspection testing by RF evaluation of each of the three IEEE 802.11ax-specified frequency bands (2.4, 5, and 6 GHz).
The rollout of 70 GHz–80 GHz 5G systems and the subsequent need for more E-band devices (like radar antennas) has placed greater importance on using VNAs
Manual testing is commonly used to confirm device under test (DUT) functionality, but in terms of scope it is impossible to use this test method to verify all permutations of RF parametric measurement