VectorStar provides a wide range of active device characterization including the highest performing pulse analysis, highest frequency noise figure measurements, and accurate IMD measurements utilizing non-linear transmission line (NLTL) samplers.
In this webinar session, you will learn about IMDView™ software that provides the ability to automatically switch between S-parameter measurements and intermodulation characterization using the optional internal second source and combiner.
You will Learn:
- IMD Background / Overview
- VectorStar IMDView Software (IMD Configuration Panel)
- IMD Settings
- Dual Source and Combiner on VectorStar
- Power and Receiver cal
- IMD Measurements on an Amplifier
- IMDView: Summary of key benefits
Mohan Puntambekar - Field Applications Engineer
Mohan’s experience stems from roles at Qualcomm and Lucent Technologies where he was involved in various Microwave design, test and measurement projects. He earned his BS and MS Engineering degrees from Coventry and Leicester Universities (both in the U.K.)