Automotive services operate at specific angular ranges in relation to the vehicle like Mobile Network communication (Near Hemisphere 60⁰ - 120⁰ or 90⁰), V2V, V2I, V2P (80⁰ - 100⁰ or 90⁰) and GNSS service (0⁰ - 60⁰). The measurements have to take this into consideration, and the ease of comparison of absorbing, and reflective ground. This results in a more complex and larger solution footprint to address the RF characterization challenges. Anritsu delivers the world’s first vehicle level 5G Over-The-Air test system in collaboration with the leading OTA test vendor, MVG. Toyota selected Anritsu for 5G OTA test system.
Most Recent Flipbooks
5G NR has opened up many verticals enabling all-around user experience expanding into the automotive space.
In testing the cellular capability of Telematic Control Unit (TCU) it is important to test abnormal situations that may arise due to misconfigurations, bad state actors, or the current conditions resu
This application note explains the necessity of inspection testing by RF evaluation of each of the three IEEE 802.11ax-specified frequency bands (2.4, 5, and 6 GHz).
The rollout of 70 GHz–80 GHz 5G systems and the subsequent need for more E-band devices (like radar antennas) has placed greater importance on using VNAs
Manual testing is commonly used to confirm device under test (DUT) functionality, but in terms of scope it is impossible to use this test method to verify all permutations of RF parametric measurement
Automobile equipment is using cellular communications for remote diagnostic monitoring of vehicle subsystems condition, Infotainment systems, and smartphone applications
V2X communications utilize RF (Radio Frequency) technology
Today, vehicles include various complex subsystems that are controlled through a Telematic Control Unit (TCU)
Pre-testing eCall at the TCU module vendor and at the automaker reduces costly delays of failure in the certification testing
Using the New Radio Non-Standalone Architecture (NR NSA) mode, a wider bandwidth can be implemented by aggregating both the LTE and NR carrier waves.
All the wireless standards, including mobile, short-range wireless, and navigation, help to keep the driver connected everywhere
In testing the cellular capability of a Telematic Control Unit (TCU), it is important to test abnormal situations that may happen in the cellular network.
New Radio (NR) with its flexible architecture and capability to provide higher order throughputs with reduced latency enables the vehicles of future to deliver these services.
Delta-L is an algorithm developed by Intel for PCB manufacturers for verifying PCB design. Vector Network Analyzer serves an important requirement for all PCB manufacturers in order to be compliant
This application note shows how to extract 2x-thru to 1x-thru using the equation editor feature in offline mode since 2x-thru is the most popular network extraction method for splitting into two (2) 1
This paper provides a step-by-step guide to perform calibration and measurement to show a “pass” or “fail” result of the device under test.
The rollout of 70 GHz–80 GHz 5G systems and the subsequent need for more E-band devices (like radar sensors) has placed greater importance on using vector network analyzers (VNAs) and their advantages
Using a HIL platform from dSPACE, together with the Anritsu MT8000A base station emulator, it is possible to reduce the risk and lower the cost of ADAS Function Test.
C-V2X enables vehicles to communicate with the world around them to increase safety and make self-driving a realistic possibility.