ShockLine™ ME7868A Over-the-Air (OTA) Chamber Solution

October 28, 2021

Using traditional VNAs to test antennas in OTA chambers generally requires long test port cables. These cables introduce insertion loss and phase instability into S-parameter measurements especially at microwave frequencies and above. As distances grow, the cable issues become so significant that additional test hardware is required to overcome the issues. This significantly raises the cost and increases the complexity of the antenna test solution.

Read the application note to learn more

Previous Flipbook
Material Measurements with Vector Network Analyzers
Material Measurements with Vector Network Analyzers

This application note will examine the issues component and device manufacturers and their engineers will f...

Next Flipbook
ME7868A Large Vehicle Over-the-Air (OTA) Test Solution
ME7868A Large Vehicle Over-the-Air (OTA) Test Solution

Using VNAs to test OTA RF/μW shielding and propagation on large vehicles generally requires very long test ...