This Application Note explains some 5G measurement methods, using the MS2850A with wide resolution bandwidth to facilitate development and manufacturing of 5G products.
Conventional spectrum analyzers have been, and will continue to be, a workhorse tool for general RF measure...
Most Recent Flipbooks
Pre-testing eCall at the TCU module vendor and at the automaker reduces costly delays of failure in the certification testing
Using the New Radio Non-Standalone Architecture (NR NSA) mode, a wider bandwidth can be implemented by aggregating both the LTE and NR carrier waves.
All the wireless standards, including mobile, short-range wireless, and navigation, help to keep the driver connected everywhere
In testing the cellular capability of a Telematic Control Unit (TCU), it is important to test abnormal situations that may happen in the cellular network.
New Radio (NR) with its flexible architecture and capability to provide higher order throughputs with reduced latency enables the vehicles of future to deliver these services.
Delta-L is an algorithm developed by Intel for PCB manufacturers for verifying PCB design. Vector Network Analyzer serves an important requirement for all PCB manufacturers in order to be compliant
This application note shows how to extract 2x-thru to 1x-thru using the equation editor feature in offline mode since 2x-thru is the most popular network extraction method for splitting into two (2) 1
This paper provides a step-by-step guide to perform calibration and measurement to show a “pass” or “fail” result of the device under test.
The rollout of 70 GHz–80 GHz 5G systems and the subsequent need for more E-band devices (like radar sensors) has placed greater importance on using vector network analyzers (VNAs) and their advantages
Using a HIL platform from dSPACE, together with the Anritsu MT8000A base station emulator, it is possible to reduce the risk and lower the cost of ADAS Function Test.
C-V2X enables vehicles to communicate with the world around them to increase safety and make self-driving a realistic possibility.
Tire Pressure Monitor Sensors (TPMS) continuously ensure tires are inflated correctly to maintain safety and maximize fuel efficiency while operating vehicles
PCIe has been seen as the preferred connectivity protocol since it provides high bandwidth, high scalability and low latency data transfer capabilities to meet the needs for increased storage of autom
Using VNAs to find radome imperfections offers multiple benefits, including reliable and repeatable radome quality assessment with simple S-parameter measurements, small footprint, cost-efficiency and
SmartStudio NR (SSNR) GUI with the MT8000A 5G Network Simulator offers multiple benefits, including reliable & repeatable testing of 5G TCUs;
Deployment in the C-band has led to interference concerns within the avionics community
Base station power and modulation quality, RF cable and antenna measurements, Cell site coverage, and EMF
This product evaluation guide was developed to help engineers start to implement wireless LAN (WLAN) technology to connect their products to the Internet.