RF Measurements for NR in Non-Terrestrial Networks

NR NTN (Non-Terrestrial Network) is one of the key topics and lead deployments for satellite D2D (Direct to Device) communication. It uses satellites, which enables communication in areas not covered by terrestrial network, but propagation delay, doppler shift and low signal level occur, creating a demanding RF environment.

In this video, we will demonstrate Anritsu's user-friendly test solution designed for RF measurements of NR NTN technology.

Previous Flipbook

Factor Separation and Evaluation Design for Terahertz Sensing: Measurement Requirements and Condition Design

Terahertz sensing presents challenges in separating object variability from environmental and system effect...

Next Flipbook

Next-Generation Technologies for Non-Terrestrial Network (NTN) Implementation

Advanced technologies that are expected to be utilized in NTNs include Network Optimization Using AI, Inter...

RF Measurements for NR in Non-Terrestrial Networks

Previous Flipbook

Next Flipbook

Other content in this Stream

Explains the trends in wireless frequency band allocation for 5G-Advanced and 6G, the features of Frequency Range 3 (FR3)

The ME7873NR is fully 3GPP-compliant and supports both FR1 (Sub-6GHz) and FR2 (mmWave) frequency bands. It can test almost all 5G NR mobiles used worldwide.

Watch this on-demand webinar for an overview of the challenges and technical difficulties in testing 5G New Radio and how to address them

This webinar presents key concepts of OTA testing, standard development, and certification.

Explore 60-GHz millimeter-wave radar and sensor innovations, global regulation trends, detection capabilities, key applications, and technical challenges with practical testing solutions.

Key factors that influence network communication quality, their corresponding performance metrics, and the importance of their evaluation for ultra-low latency.

This video explains Anritsu's IP data throughput testing solution for 5G devices.

This white paper describes beam management requirements in 5G NR and introduces an effort to validate its functionality using the Anritsu Test Solution.

Base Station Test Suite for 5G NR Sub-6 GHz MX800046A / Base Station Test Suite for 5G NR mmWave MX800045A cover the frequency bands up to 7.125 GHz (FR1) and the mmWave band (FR2), while supporting t

In this webinar, you will learn everything you need to know about loading test profiles onto eSIM devices

Ensuring 5G New Radio (NR) User Equipment (UE) operability as it is commercialized requires a greater emphasis on over-the-air (OTA) testing

MT8000 + MD8475B HW Setup for ENDC Testing Introduction to SSNR for 5G Functional Testing (Simulation/Cell Parameters, Logging and Measurement Tools, and more.)

This webinar will introduce you to the current state of 5G landscape, various 5G cellular features targeted for development and deployment

So what is Dynamic Spectrum Sharing (DSS) and why is it necessary as 5G is rolled out?

Dynamic Spectrum Sharing (DSS) is a key feature existing 4G LTE cellular operators can utilize to augment their migration to 5G NR.

At the evaluation of 5G devices, confirming the connection to the application server set at the network-side is necessary in order to test the service quality

MT8000 + MT8821C HW Setup Overview for ENDC Testing Introduction to the RF Measurement SW (System Configuration, Parameters, Measurement Windows, and more.)