This white paper explains the trends in wireless frequency band allocation for 5G-Advanced and 6G, the features of Frequency Range 3 (FR3), which ranges from 7.125 GHz to 24.25 GHz, that is expected to realize low attenuation and device miniaturization, the challenges it faces, and the technologies that will help overcome these.
8:39The ME7873NR is fully 3GPP-compliant and supports both FR1 (Sub-6GHz) and FR2 (mmWave) frequency bands. It can test almost all 5G NR mobiles used worldwide.
52:44Watch this on-demand webinar for an overview of the challenges and technical difficulties in testing 5G New Radio and how to address them
42:50This webinar presents key concepts of OTA testing, standard development, and certification.
Explore 60-GHz millimeter-wave radar and sensor innovations, global regulation trends, detection capabilities, key applications, and technical challenges with practical testing solutions.
Key factors that influence network communication quality, their corresponding performance metrics, and the importance of their evaluation for ultra-low latency.
This white paper describes beam management requirements in 5G NR and introduces an effort to validate its functionality using the Anritsu Test Solution.
3:48Base Station Test Suite for 5G NR Sub-6 GHz MX800046A / Base Station Test Suite for 5G NR mmWave MX800045A cover the frequency bands up to 7.125 GHz (FR1) and the mmWave band (FR2), while supporting t
56:25In this webinar, you will learn everything you need to know about loading test profiles onto eSIM devices
Ensuring 5G New Radio (NR) User Equipment (UE) operability as it is commercialized requires a greater emphasis on over-the-air (OTA) testing
52:44MT8000 + MD8475B HW Setup for ENDC Testing Introduction to SSNR for 5G Functional Testing (Simulation/Cell Parameters, Logging and Measurement Tools, and more.)
55:16This webinar will introduce you to the current state of 5G landscape, various 5G cellular features targeted for development and deployment
So what is Dynamic Spectrum Sharing (DSS) and why is it necessary as 5G is rolled out?
1:04:53Dynamic Spectrum Sharing (DSS) is a key feature existing 4G LTE cellular operators can utilize to augment their migration to 5G NR.
3:37At the evaluation of 5G devices, confirming the connection to the application server set at the network-side is necessary in order to test the service quality
42:04MT8000 + MT8821C HW Setup Overview for ENDC Testing Introduction to the RF Measurement SW (System Configuration, Parameters, Measurement Windows, and more.)
