Performing Broadband 220 GHz VNA On-Wafer Measurements 3-Part Series

July 20, 2021

Share this Video

This 3-part series of the VectorStar ME7838G broadband system will describe how the VectorStar ME7838G can be set up to make on-wafer measurements sweeping from 70 kHz to 220 GHz.

Part 1 of the series will discuss the basic broadband structure, module interface technologies, and the broadband 220 GHz probe.

Part 2 will continue the discussion with broadband calibration and broadband measurement best practices.

Part 3 will close the series with a discussion on instrument attributes, calibration accuracy, and repeatability, and close with a comparison and example measurements.

Previous Video

Anritsu Brand video 2021

Next Video

Performance Broadband 220 GHz VNA On-Wafer Measurement - Part 3

This three-part series of the VectorStar ME7838G broadband system will describe how the VectorStar ME7838G ...

Shop our Certified Demo Equipment Sale

Shop Now

Most Recent Videos

5:41

5G Video Quality Test

Performing Broadband 220 GHz VNA On-Wafer Measurements 3-Part Series

Previous Video

Next Video

Most Recent Videos

This short video introduces the 5G video quality test solution, developed and launched by Anritsu in partnership with Spirent Communications. This solution utilizes SmartStudio NR control software and

Watch a demonstration using the MT1000A to save time and money by verifying that Bi-Directional SFP28’s are paired properly before deployment.

Watch the video to see how easy interference hunting can be. The system finds signals such as low power, narrowband or wideband, hidden and others over the entire frequency range of the spectrum analy

This video will demonstrate several 5G OTA measurements such as: Multibeam or Single beam, PCI scan, constellation of 5G signal, channel power, occupancy band, EIRP and carrier aggregation.

Learn all about PIM issues in C-band and how to test them. You'll hear a brief overview of C-band and testing methods such as PIM testing, PIM hunting, gated sweep and RTSA.

This video introduces the latest addition to the ShockLine family, ME7868A 2-Port VNA system. It is a new concept in VNAs that has a configurable modular architecture that takes two ShockLine MS46131A

In order to launch your smart device, it is important to evaluate whether the anticipated services can be achieved and confirm the wireless performance.

CETECOM shows their 5G FR1 and FR2 testing capabilities using Anritsu’s Radio Communication Test Station MT8000A, which also allows to easily switch between different applications, such as OTA, SAR an

Challenges to testing a true multi-vendor Open-RAN ecosystem

In this video, PCTEST/Element shows their 5G FR1 and FR2 Protocol, Conformance and Carrier Acceptance testing capabilities using Anritsu’s New Radio RF Conformance Test System ME7873NR and 5G NR Mobil

PCTEST/Element shows their 5G FR1 and FR2 testing capabilities using Anritsu’s Radio Communication Test Station MT8000A

ShockLine Vector Network Analyzers Automotive Applications Overview Discover how ShockLine VNAs are utilized for testing automotive applications both inside and outside of the vehicle.

Leading the Way to Autonomous & Cooperative Driving [44 min] A key technology for autonomous driving, this webinar looks at the present status of C-V2X, standards and future enhancements. Present and

The Importance of eCall Testing [36 min] A built-in vehicle eCall system can mean the difference between life and death. This webinar provides details of eCall system, its history, implementation, le