Home » Internet of Things » RF Measurements for NR in Non-Terrestrial Networks

× Share this Video

RF Measurements for NR in Non-Terrestrial Networks

Share this Video

NR NTN (Non-Terrestrial Network) is one of the key topics and lead deployments for satellite D2D (Direct to Device) communication. It uses satellites, which enables communication in areas not covered by terrestrial network, but propagation delay, doppler shift and low signal level occur, creating a demanding RF environment.

In this video, we will demonstrate Anritsu's user-friendly test solution designed for RF measurements of NR NTN technology.

Previous Flipbook

Identifying Problems Using Signalling Tester to Save Time for Quick Release- PAX Technology’s Strategic Partnership with Anritsu

PAX Technology uses Anritsu’s MD8475B Signalling Tester to streamline wireless POS terminal development.

Next Flipbook

Next-Generation Technologies for Non-Terrestrial Network (NTN) Implementation

Advanced technologies that are expected to be utilized in NTNs include Network Optimization Using AI, Inter...

Other content in this Stream

Key Technologies for IEEE 802.11bn- Ultra High Reliability (UHR)

IEEE 802.11bn (Wi-Fi 8) aims to boost Wi-Fi performance with 25% better throughput, latency, and packet loss, focusing on reliability, efficiency, and power management.

Read White Paper

AGV and AMR Applications in Manufacturing and Logistics

Wireless communication technologies (Bluetooth, WLAN, 5G) enable autonomous operation and data transmission of “automatic transport robots,” optimizing efficiency and safety through latest advances.

Read White Paper

Sunnyverse Selects Anritsu WLAN and BLUETOOTH🄬 Technology Measurement Products to Evaluate RF Performance of XR Devices

Sunnyverse selected Anritsu’s Wireless Connectivity Test Set (MT8862A) and Bluetooth Test Set (MT8852B), optimizing wireless communication performance, and improve data transfer reliability and more.

Read Case Study

4:25

RF Interference from Common Domestic Appliances

Analyzing RF interference with the Field Master RTSA

Watch Video

Mobile Operator Improves Device Verification Process Using Anritsu Signal Monitoring Custom Solution

Tier 1 U.S. mobile operator automates device test rooms using Anritsu’s signal monitoring to ensure real-world 5G accuracy and streamline scheduling for faster, more reliable UE validation.

Read Case Study

3:26

MT8862A IEEE 802.11be 2x2 MIMO

Transmitter and Receiver RF tests for IEEE 802.11be 2x2 MIMO

Watch Video

2:49

Using CombiTest and the MT8852B to Run Bluetooth BR/EDR/BLE Tests

A short video explaining how to make BR / EDR / BLE measurements on a Bluetooth module using the Anritsu MT8852B test instrument and the CombiTest software.

Watch Video

2:03

Optimize 5G US mmWave 3D EIS Scan Test Times with Machine Learning Software (MX800010A-026)

Anritsu’s MT8000A plus MA8172A support 3GPP tests of antenna properties at all positions for mmWave UE development.

Watch Video

4:14

Using the MT8852B to Test a Bluetooth Low Energy Device

A short video explaining how to use the Anritsu MT8852B test set and the MX885203A low energy software to perform Bluetooth low energy tests.

Watch Video

Murata Manufacturing Co., Ltd - Construct an RFI Test Environment Established by USB-IF with a Spectrum Analyzer

Construct an RFI Test Environment Established by USB-IF with a Spectrum Analyzer Propose Solutions to EMC Problems Through Effective Utilization of Common-Mode Choke Coils

Read Case Study

Wireless LAN Product Design Guide - Competitor Investigation

Developing new products or implementing upgrades, performance comparisons with other companies’ products, in-house products to understand market trends as well as an important step

Read Application Note

Wireless LAN Product Design Guide - Parts Selection

Guide explains what to consider to achieve the RF performance (signal quality) required to implement stable communications in any environment and what WLAN module to choose.

Read Application Note

Wireless LAN Product Design Guide - Product Design and Development

explains the key points in designing and developing wireless LAN (WLAN) products to engineers designing such products for the first time.

Read Application Note

Wireless LAN Product Design Guide - Certification Guide

easy-to-understand explanation for new designers of wireless LAN (WLAN hereafter) products and covers key points in designing and developing these products

Read Application Note

Wireless LAN Product Design Guide - After Commercial Release

RF performance evaluation that is still required after commercialization

Read Application Note

Wireless LAN and Bluetooth® Technology

Read Application Note

49:46

Evolution Towards Latest Wi-Fi7 Standard 802.11be and Its Application in IoT

Overview of all Wi-Fi standards, focusing on adoption of 6GHz band in latest Wi-Fi6e standard and ongoing Wi-Fi7 standard.

Watch Webinar

1:04:45

Typical Measurements in WLAN Technology and Its Application in Manufacturing of IoT Devices

Explanation of the evolution of Wi-Fi from a simple wired network replacement to an important cellular network traffic offloading mechanism.

Watch Webinar

4:40

IEEE 802.11be Transmitter and Receiver Test - MT8862A Wireless Connectivity Test Set (WLAN Tester)

IEEE 802.11 be Transmitter and Receiver RF tests

Watch Video

Key Technologies for IEEE 802.11be (Wi-Fi 7)

802.11be (Wi-Fi 7) is a new wireless LAN technology that is undergoing standardization and is expected to support the latest applications and services

Read White Paper

Return to Home